Please take a minute to review and accept our Terms of Use.
Welcome to the PLECS User Forum, where you can ask questions and receive answers from other members of the community.

Many technical questions regarding PLECS are answered on the Technical Solutions page of our website. Tutorial videos, specific application examples, and pre-recorded webinars are available on our YouTube page. Please follow us on LinkedIn for the latest Plexim news.

How to perform an open circuit test on a transformer

0 votes
31 views
I am trying to perform an open circuit test in PLECS but I am struggling to get realistic values. An example is the current when there is no load is coming back more than 20A with a 240V supply.

I have attached an image of my setup. Where am I going wrong?
asked Feb 12 by ahook1 (12 points)
There is no image attached...
Don't know why it wasn't but it is now...

The turns ratio is 1:10 and the source is connected to the low voltage side.

1 Answer

0 votes
Hi, unfortunately it's not clear from the schematic how you are representing the impedance (any copper/core losses). Can you include your actual model, or at least show what's inside the subsystem?
answered Feb 19 by Kris Eberle (1,078 points)
...