I am running a closed loop simulation, and trying to measure the transfer function of my converter (plant) using the multitone analysis.
My simulation starts at t=0, and at that time there is a transient, which takes 10 s to settle. Therefore, I am running the Multitone analysis with these settings, where I set "Init. simul period = 10". Just wondering wether this is correct, ie. is the multitone analysis is being performed only after 10 s that the simulation has been running? i.e is the result of the multitone meaningful and representing a perturbation occurring at steady state for my circuit (which settles after 10 s)?