i'm using the RT Box 1 to make some HIL tests with my F28379D Boards.
First I tested my setup with the F28379D Launch Pad together with the LaunchPad Interface and everything works fine. -> I am giving you this information because it can be ruled out that it is a software problem.
Then i changed the setup to the F28379D controller card with the RT-Box's ControllerCard Interface. I use the power supply from the Interface and have a Data-Connection via USB between my Laptop and the controller card (mini USB not micro USB).
The problem now is that the readings from the ADCs are too low. In 12 bit mode 3.3V means 4095bit but i'm only measuring about 2935bit. If i give 3.3/2 V to the controller, i can measure 1466bit - not 4095/2.
I think this could be a problem in the power supply but I haven't been able to come up with a solution so far. Maybe some jumpers on the controller card wich i have to open or to short..?
Is there anyone how can help me with this? Thanks!