Please take a minute to review and accept our Terms of Use.
Welcome to the PLECS User Forum, where you can ask questions and receive answers from other members of the community.

Many technical questions regarding PLECS are answered on the Technical Solutions page of our website. Tutorial videos, specific application examples, and pre-recorded webinars are available on our YouTube page. Please follow us on LinkedIn for the latest Plexim news.

Is it possible to choose which pin gets configured as an epwm in the c2000 automatic code generation?

0 votes
12,407 views
Is it possible to choose which pin gets configured as an epwm in the c2000 automatic code generation? For example, epwm1A could be configured as gpio_0 or gpio_145 in the TI F28379D dsp using c-code. But I don't see any option to select which pin is to be used in either of the two pwm blocks provided by plecs. I assume it uses gpio_0 by default. Is there any way to select gpio_145 as epwm1A using plecs auto generated code. If it is not possible, it might be a good option to include in a future update.
asked Jun 9 by Chatumal (14 points)
Hi, send an email to Plexim support at support@pexim.com and we should be able to provide you with a workaround.

Regards,
Manu

Please log in or register to answer this question.

...