Please take a minute to review and accept our Terms of Use.
Welcome to the PLECS User Forum, where you can ask questions and receive answers from other members of the community.

Many technical questions regarding PLECS are answered on the Technical Solutions page of our website. Tutorial videos, specific application examples, and pre-recorded webinars are available on our YouTube page. Please follow us on LinkedIn for the latest Plexim news.

I have replicated a circuit of an AC-DC-DC converter in PLECS but I'm getting different waveforms

0 votes
I have modelled a bidirectional AC-DC-DC converter in Simulink and it works great, I now want to model the losses in the MOSFETS using PLECS therefore, I have put the converter itself in a PLECS circuit and the control has been left outside in the Simulink environment. The waveform of the dc bus voltage is not what I expected, the battery current remains 0 the whole time, and the grid current waveform is also not what I expected despite seemingly inputting the same parameters in both versions. The files to both versions have been attached
asked Mar 12 by Obiora (14 points)
There are no files attached, but it sounds like an implementation error.

Please log in or register to answer this question.