# Copy Schematic from Blockset to Blockset

**URL:** <https://forum.plexim.com/t/copy-schematic-from-blockset-to-blockset/1220>\
**Category:** PLECS\
**Tags:** plecs-blockset\
**Created:** [March 21, 2023, 8:59am UTC](https://forum.plexim.com/t/copy-schematic-from-blockset-to-blockset/1220 "2023-03-21T08:59:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hannes\_Thielke](https://avatars.discourse-cdn.com/v4/letter/h/b38774/32.png) [@Hannes\_Thielke](https://forum.plexim.com/u/Hannes_Thielke)\
**Post date:** [March 21, 2023, 8:59am UTC](https://forum.plexim.com/t/copy-schematic-from-blockset-to-blockset/1220/1 "2023-03-21T08:59:15Z")

</div>

I’d like to copy a schematic from a Blockset circuit to another Blockset circuit but unfortunately this does not work as in Standalone. The only way I managed to do this is by exporting it to a Standalone Model and Importing it back. Is there a better way to do this?

---

<div class="post-metadata">

**Author:** ![wolfgang](https://dub1.discourse-cdn.com/flex006/user_avatar/forum.plexim.com/wolfgang/32/7_2.png) [@wolfgang](https://forum.plexim.com/u/wolfgang)\
**Post date:** [March 27, 2023, 9:16am UTC](https://forum.plexim.com/t/copy-schematic-from-blockset-to-blockset/1220/2 "2023-03-27T09:16:41Z")

</div>

You can use drag&drop or clipboard copy between schematic windows that belong to the same editor application both in PLECS Standalone and PLECS Blockset.

I suspect that you have started two instances of MATLAB/Simulink and thus also have two instances of the PLECS schematic editor. Copying between schematic windows of these two editor applications is indeed not possible.