# Diode reverse recovery loss modelling using the MOSFET-with-diode component

**URL:** <https://forum.plexim.com/t/diode-reverse-recovery-loss-modelling-using-the-mosfet-with-diode-component/1796>\
**Category:** PLECS\
**Tags:** thermal-model, mosfet-with-diode\
**Created:** [February 18, 2025, 4:28am UTC](https://forum.plexim.com/t/diode-reverse-recovery-loss-modelling-using-the-mosfet-with-diode-component/1796 "2025-02-18T04:28:31Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Bryan\_Lieblick](https://dub1.discourse-cdn.com/flex006/user_avatar/forum.plexim.com/bryan_lieblick/32/10_2.png) [@Bryan\_Lieblick](https://forum.plexim.com/u/Bryan_Lieblick)\
**Post date:** [February 18, 2025, 4:56pm UTC](https://forum.plexim.com/t/diode-reverse-recovery-loss-modelling-using-the-mosfet-with-diode-component/1796/2 "2025-02-18T16:56:28Z")

</div>

From [this related forum post](https://forum.plexim.com/t/how-to-model-the-losses-for-the-mosfet-with-the-body-diode/1249/2):

> as per the below screenshot of the PLECS User Manual on this topic, you can enter the body diode Err losses in the left half plane (negative currents) of the Turn-off losses table:
> 
> ![image](https://europe1.discourse-cdn.com/flex006/uploads/plecs/original/2X/d/d0058a811a46b7119ac069b518155e56aa79ccb2.jpeg)

---

_[View the full topic](https://forum.plexim.com/t/diode-reverse-recovery-loss-modelling-using-the-mosfet-with-diode-component/1796)._