# How can I stop and capture transient-state data of scope when the model is running on RT-Box?

**URL:** <https://forum.plexim.com/t/how-can-i-stop-and-capture-transient-state-data-of-scope-when-the-model-is-running-on-rt-box/922>\
**Category:** RT Box\
**Tags:** scope, rt-box\
**Created:** [December 11, 2020, 4:46am UTC](https://forum.plexim.com/t/how-can-i-stop-and-capture-transient-state-data-of-scope-when-the-model-is-running-on-rt-box/922 "2020-12-11T04:46:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JX\_LIU](https://avatars.discourse-cdn.com/v4/letter/j/439d5e/32.png) [@JX\_LIU](https://forum.plexim.com/u/JX_LIU)\
**Post date:** [December 11, 2020, 4:46am UTC](https://forum.plexim.com/t/how-can-i-stop-and-capture-transient-state-data-of-scope-when-the-model-is-running-on-rt-box/922/1 "2020-12-11T04:46:00Z")

</div>

When the dc–dc converter is running on RT-Box with “Auto triggering”，there is a swith short-circuit Fault occurred which caused by Fault injection signal anytime. So how can I stop and capture transient-state data of scope?

---

<div class="post-metadata">

**Author:** ![shichenseu](https://avatars.discourse-cdn.com/v4/letter/s/43a26b/32.png) [@shichenseu](https://forum.plexim.com/u/shichenseu)\
**Post date:** [December 14, 2020, 8:28am UTC](https://forum.plexim.com/t/how-can-i-stop-and-capture-transient-state-data-of-scope-when-the-model-is-running-on-rt-box/922/2 "2020-12-14T08:28:36Z")

</div>

I remember there is a block to output the data in plecs ,but I do not remember whether it supports real time testing