# PWM Sequence Problem

**URL:** <https://forum.plexim.com/t/pwm-sequence-problem/3386>\
**Category:** TI C2000\
**Tags:** pwm\
**Created:** [November 9, 2026, 6:34am UTC](https://forum.plexim.com/t/pwm-sequence-problem/3386 "2026-11-09T06:34:55Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![juppy](https://avatars.discourse-cdn.com/v4/letter/j/e36b37/32.png) [@juppy](https://forum.plexim.com/u/juppy)\
**Post date:** [November 9, 2026, 6:34am UTC](https://forum.plexim.com/t/pwm-sequence-problem/3386/1 "2026-11-09T06:34:56Z")

</div>

Hello,

I am trying to change the order of which the PWM outputs are triggered for a C2000 series target. Currently the negative output of the PWM complimentary pair rises first, then fall, then deadtime and then the positive output rises, etc. I would like the positive output to rise first. I have tried changing the ‘Sequence’ parameter on the TI PWM block, with no luck.

I have attached the simple PLECS file which I am trying to get this to work on.

Cheers,  
Will

[Dev\_Board.plecs](https://forum.plexim.com/uploads/short-url/6Y6QDciTJ0C1FazMOsQ09o9uBJ4.plecs) (49.7 KB)