# Transfer Scope data to Matlab

**URL:** <https://forum.plexim.com/t/transfer-scope-data-to-matlab/589>\
**Category:** PLECS\
**Tags:** scope, matlab\
**Created:** [November 12, 2018, 7:17am UTC](https://forum.plexim.com/t/transfer-scope-data-to-matlab/589 "2018-11-12T07:17:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![karakaslivefa](https://avatars.discourse-cdn.com/v4/letter/k/a88e4f/32.png) [@karakaslivefa](https://forum.plexim.com/u/karakaslivefa)\
**Post date:** [November 12, 2018, 7:17am UTC](https://forum.plexim.com/t/transfer-scope-data-to-matlab/589/1 "2018-11-12T07:17:30Z")

</div>

Hello,

In Matlab Simulink scope, the data can be transferred to Matlab workspace as shown in the below figure. I could not find this in the Plecs Blockset. How can I transfer the scope data to Matlab workspace?

.

 ![69](https://europe1.discourse-cdn.com/flex006/uploads/plecs/original/1X/70c3d9d5300f4f0ca4db7c1cf51de911ab270d33.png)

Regards

Vefa

---

<div class="post-metadata">

**Author:** ![Kris\_Eberle](https://dub1.discourse-cdn.com/flex006/user_avatar/forum.plexim.com/kris_eberle/32/6_2.png) [@Kris\_Eberle](https://forum.plexim.com/u/Kris_Eberle)\
**Post date:** [November 14, 2018, 3:30am UTC](https://forum.plexim.com/t/transfer-scope-data-to-matlab/589/2 "2018-11-14T03:30:56Z")

</div>

Hello Vefa,

The PLECS Scope does not have an export to Workspace feature in Blockset. However, there is a block in the Blockset component library (“To Workspace”) that allows you to do exactly this by sinking any signal or physical measurement value.

Best regards,

Kris