# \#cyclic-behavior

**URL:** https://forum.plexim.com/tag/cyclic-behavior/323.md

[Latest](https://forum.plexim.com/latest.md) · [Categories](https://forum.plexim.com/categories.md) · [Tags](https://forum.plexim.com/tags.md)

---

## [MMC Cyclic behavior during switching](https://forum.plexim.com/t/mmc-cyclic-behavior-during-switching/1287)

<div class="topic-metadata">

**Author:** [@mohammad\_qaza](https://forum.plexim.com/u/mohammad_qaza)\
**Replies:** 3\
**Last updated:** [November 17, 2023, 9:28am UTC](https://forum.plexim.com/t/mmc-cyclic-behavior-during-switching/1287 "2023-11-17T09:28:06Z")

</div>

Please I need some help, I’m trying to simulate a MMC with 5 cells per arm dual half bridge submodels. I get the Cyclic behavior during switching error, I have tried all solutions listed in forum and help guides no luck …

---

## [Error: Cyclic behavior during switching](https://forum.plexim.com/t/error-cyclic-behavior-during-switching/929)

<div class="topic-metadata">

**Author:** [@Silpa](https://forum.plexim.com/u/Silpa)\
**Replies:** 3\
**Last updated:** [December 17, 2020, 11:01pm UTC](https://forum.plexim.com/t/error-cyclic-behavior-during-switching/929 "2020-12-17T23:01:48Z")

</div>

Hi Everyone, I am getting an error “Cyclic behavior during switching” while trying to run the simulation attached. Tried different solutions as said in the attached paper. Could anyone help me correct the simulation f…

---

## [Cyclic behavior during switching. Changing solver doesn't help](https://forum.plexim.com/t/cyclic-behavior-during-switching-changing-solver-doesnt-help/740)

<div class="topic-metadata">

**Author:** [@christi](https://forum.plexim.com/u/christi)\
**Replies:** 1\
**Last updated:** [February 4, 2020, 12:18pm UTC](https://forum.plexim.com/t/cyclic-behavior-during-switching-changing-solver-doesnt-help/740 "2020-02-04T12:18:29Z")

</div>

Hey Guys, I m an doing a simulation and it come the fault:“Cyclic behavior during swithing, Switches that bounced”. I tried to figure out this problem by Tightening the relative tolerance of the solver (from 1e-3 to 1e-…

---

## ["Unable to meet integration tolerances" problem](https://forum.plexim.com/t/unable-to-meet-integration-tolerances-problem/460)

<div class="topic-metadata">

**Author:** [@nikilito](https://forum.plexim.com/u/nikilito)\
**Replies:** 1\
**Last updated:** [July 30, 2018, 8:43pm UTC](https://forum.plexim.com/t/unable-to-meet-integration-tolerances-problem/460 "2018-07-30T20:43:57Z")

</div>

Hi everyone! Tonight I left running the simulation and this morning I found this error: “Unable to meet integration tolerances without reducing step size below smallest value allowed (7.1072e-14)”. I have a 3-ph inver…