# \#documentation

**URL:** https://forum.plexim.com/tag/documentation/140.md

[Latest](https://forum.plexim.com/latest.md) · [Categories](https://forum.plexim.com/categories.md) · [Tags](https://forum.plexim.com/tags.md)

---

## [Is it possible to reset of RT Box after an error without rebuilding and uploading the model?](https://forum.plexim.com/t/is-it-possible-to-reset-of-rt-box-after-an-error-without-rebuilding-and-uploading-the-model/587)

<div class="topic-metadata">

**Author:** [@kathan](https://forum.plexim.com/u/kathan)\
**Replies:** 1\
**Last updated:** [November 7, 2018, 9:59am UTC](https://forum.plexim.com/t/is-it-possible-to-reset-of-rt-box-after-an-error-without-rebuilding-and-uploading-the-model/587 "2018-11-07T09:59:06Z")

</div>

Hello, currently I’m facing the problem that the RT Box is entering sometimes the error mode, when the connected controller resets. The model is an inverter where the two half-bridges are controlled using an external co…

---

## [Where can I find documentation on the RT Box Breakout Boards?](https://forum.plexim.com/t/where-can-i-find-documentation-on-the-rt-box-breakout-boards/560)

<div class="topic-metadata">

**Author:** [@qdit](https://forum.plexim.com/u/qdit)\
**Replies:** 2\
**Last updated:** [October 26, 2018, 2:49am UTC](https://forum.plexim.com/t/where-can-i-find-documentation-on-the-rt-box-breakout-boards/560 "2018-10-26T02:49:12Z")

</div>

Hi, I’m looking for some more information especially on the Digital Breakout Board, since judging by the product page there seems to be more going on than just passive routing (CAN-Transceivers etc.). However I could no…