# \#machine-parameters

**URL:** https://forum.plexim.com/tag/machine-parameters/313.md

[Latest](https://forum.plexim.com/latest.md) · [Categories](https://forum.plexim.com/categories.md) · [Tags](https://forum.plexim.com/tags.md)

---

## [Demo model "Vector Control of an Induction Machine"](https://forum.plexim.com/t/demo-model-vector-control-of-an-induction-machine/993)

<div class="topic-metadata">

**Author:** [@raphael.baumeler](https://forum.plexim.com/u/raphael.baumeler)\
**Replies:** 2\
**Last updated:** [March 26, 2021, 3:46am UTC](https://forum.plexim.com/t/demo-model-vector-control-of-an-induction-machine/993 "2021-03-26T03:46:11Z")

</div>

Dear plexim team I am not sure if I understand the equivalent circuit in the demo model “Vector Control of an Induction Machine” correctly (see attachment). I only know the static equivalent circuit per phase (see attac…

---

## [How to input rated values of a synchronous machine in parameters tab](https://forum.plexim.com/t/how-to-input-rated-values-of-a-synchronous-machine-in-parameters-tab/450)

<div class="topic-metadata">

**Author:** [@aarthisv26](https://forum.plexim.com/u/aarthisv26)\
**Replies:** 2\
**Last updated:** [August 11, 2020, 6:33am UTC](https://forum.plexim.com/t/how-to-input-rated-values-of-a-synchronous-machine-in-parameters-tab/450 "2020-08-11T06:33:58Z")

</div>

Hello, I am using a synchronous machine (SI units) for my model, there is no option to input the rated power, voltage/frequency in the block parameters. How does the software presume the rated values. Is there any mappin…

---

## [How to change the text of legend?](https://forum.plexim.com/t/how-to-change-the-text-of-legend/762)

<div class="topic-metadata">

**Author:** [@Tomule](https://forum.plexim.com/u/Tomule)\
**Replies:** 3\
**Last updated:** [April 23, 2020, 11:40am UTC](https://forum.plexim.com/t/how-to-change-the-text-of-legend/762 "2020-04-23T11:40:09Z")

</div>

I have connected a DC motor and a displayed electrical torque on XY plot, later I need to have three electrical torques on the same graph and for every characteristic in graph legend it says electrical torque, how to cha…

---

## [Induction machine how to provide load torque](https://forum.plexim.com/t/induction-machine-how-to-provide-load-torque/620)

<div class="topic-metadata">

**Author:** [@archie1112](https://forum.plexim.com/u/archie1112)\
**Replies:** 2\
**Last updated:** [January 31, 2019, 12:35pm UTC](https://forum.plexim.com/t/induction-machine-how-to-provide-load-torque/620 "2019-01-31T12:35:27Z")

</div>

Hi there, To specify the load torque of the open stator coils induction machine, I was attaching a ‘controlled torque’ block at the what seemed to be the output terminal of the machine, as shown in the attached image. I…

---

## [Viewing induction motor output rpm and torque](https://forum.plexim.com/t/viewing-induction-motor-output-rpm-and-torque/617)

<div class="topic-metadata">

**Author:** [@archie1112](https://forum.plexim.com/u/archie1112)\
**Replies:** 2\
**Last updated:** [January 28, 2019, 7:41am UTC](https://forum.plexim.com/t/viewing-induction-motor-output-rpm-and-torque/617 "2019-01-28T07:41:52Z")

</div>

I am using the induction motor models from electrical machines library. Though I can see the output signal port, I am not sure how to view it using a scope. Specifically, I need to know when the machine is in generator m…