# \#steady-state-analysis **URL:** https://forum.plexim.com/tag/steady-state-analysis/191.md [Latest](https://forum.plexim.com/latest.md) · [Categories](https://forum.plexim.com/categories.md) · [Tags](https://forum.plexim.com/tags.md) --- ## [Can I change system's initial state via scripting?](https://forum.plexim.com/t/can-i-change-systems-initial-state-via-scripting/766)
**Author:** [@owiecc](https://forum.plexim.com/u/owiecc)\ **Replies:** 6\ **Last updated:** [November 6, 2025, 4:48pm UTC](https://forum.plexim.com/t/can-i-change-systems-initial-state-via-scripting/766 "2025-11-06T16:48:19Z")
I have problems finding the steady-state of a converter using the steady-state analysis tool. In time domain my system reaches steady-state. Is it possible to save the state of a system using scripting and then re-run th… --- ## [Output of Time until system reaches thermal Steady State Operation](https://forum.plexim.com/t/output-of-time-until-system-reaches-thermal-steady-state-operation/1314)
**Author:** [@THK](https://forum.plexim.com/u/THK)\ **Replies:** 2\ **Last updated:** [February 6, 2024, 7:29am UTC](https://forum.plexim.com/t/output-of-time-until-system-reaches-thermal-steady-state-operation/1314 "2024-02-06T07:29:40Z")
Hello,I would like to investigate different modulation strategies for a 3-LVL-ANPC-SiC topology under different operating points regarding overall efficiency and power dissipation (temperature) per switch.And I would lik… --- ## [Why I get this " Unexpected feedback during calculation of switch losses." while doing steady state analysis?](https://forum.plexim.com/t/why-i-get-this-unexpected-feedback-during-calculation-of-switch-losses-while-doing-steady-state-analysis/1203)
**Author:** [@LAXMIPRIYA\_TR](https://forum.plexim.com/u/LAXMIPRIYA_TR)\ **Replies:** 1\ **Last updated:** [February 3, 2023, 3:16pm UTC](https://forum.plexim.com/t/why-i-get-this-unexpected-feedback-during-calculation-of-switch-losses-while-doing-steady-state-analysis/1203 "2023-02-03T15:16:58Z")
--- ## [Speed of analysis tools -- Blockset vs. Standalone](https://forum.plexim.com/t/speed-of-analysis-tools-blockset-vs-standalone/1129)
**Author:** [@nbiesterfeld](https://forum.plexim.com/u/nbiesterfeld)\ **Replies:** 1\ **Last updated:** [June 30, 2022, 3:06pm UTC](https://forum.plexim.com/t/speed-of-analysis-tools-blockset-vs-standalone/1129 "2022-06-30T15:06:01Z")
Running steady-state and impulse response analyses on my model requires a few seconds in standalone and several, if not tens of, minutes in blockset. Is this disparity typical, and if so, why does blockset take significa… --- ## [Too many return arguments are specified in steady state analysis tool - PLECS Blockset](https://forum.plexim.com/t/too-many-return-arguments-are-specified-in-steady-state-analysis-tool-plecs-blockset/1128)
**Author:** [@nbiesterfeld](https://forum.plexim.com/u/nbiesterfeld)\ **Replies:** 2\ **Last updated:** [June 23, 2022, 5:18pm UTC](https://forum.plexim.com/t/too-many-return-arguments-are-specified-in-steady-state-analysis-tool-plecs-blockset/1128 "2022-06-23T17:18:30Z")
Hello, When running the steady-state analysis tool for PLECS blockset through both the interface and command line, I get an error that says “Error using plsteadystate. Too many return arguments are specified. Specify on… --- ## [Steady state analysis for thermal performance](https://forum.plexim.com/t/steady-state-analysis-for-thermal-performance/1100)
**Author:** [@Haochen\_Tao](https://forum.plexim.com/u/Haochen_Tao)\ **Replies:** 6\ **Last updated:** [March 9, 2022, 3:33pm UTC](https://forum.plexim.com/t/steady-state-analysis-for-thermal-performance/1100 "2022-03-09T15:33:02Z")
Hi: My issue for the thermal analysis is that the system always reports an unrealistic junction temperature that is far below the limit, which is shown in the first picture, in other cases it might display a unrealisiti… --- ## [State flow General question](https://forum.plexim.com/t/state-flow-general-question/951)
**Author:** [@Samk](https://forum.plexim.com/u/Samk)\ **Replies:** 2\ **Last updated:** [February 5, 2021, 1:07pm UTC](https://forum.plexim.com/t/state-flow-general-question/951 "2021-02-05T13:07:45Z")
Hi, I have question on stateflow. In PLECS, state flow has 3 sub states (Enter, During and Exit). (1) Do these substates run in parallel or one after the other. I mean when input condition is true, then logic inside “E… --- ## [Why is my steady state analysis of a dc-dc converter aborted due to errors?](https://forum.plexim.com/t/why-is-my-steady-state-analysis-of-a-dc-dc-converter-aborted-due-to-errors/279)
**Author:** [@EMdude](https://forum.plexim.com/u/EMdude)\ **Replies:** 2\ **Last updated:** [February 16, 2018, 11:06am UTC](https://forum.plexim.com/t/why-is-my-steady-state-analysis-of-a-dc-dc-converter-aborted-due-to-errors/279 "2018-02-16T11:06:03Z")
Dear Community, As I am trying to get the frequency response of DC/DC converter,exactly the control to error transfer function Vout(s)/Verr(s) (Verror=Vref-Vout). after launching the analysis I get this error message as…