# \#tic2000

**URL:** https://forum.plexim.com/tag/tic2000/584.md

[Latest](https://forum.plexim.com/latest.md) · [Categories](https://forum.plexim.com/categories.md) · [Tags](https://forum.plexim.com/tags.md)

---

## [Real time simulation gives different results for Vienna rectifier](https://forum.plexim.com/t/real-time-simulation-gives-different-results-for-vienna-rectifier/1947)

<div class="topic-metadata">

**Author:** [@dimassfauzi](https://forum.plexim.com/u/dimassfauzi)\
**Replies:** 2\
**Last updated:** [March 26, 2025, 8:10am UTC](https://forum.plexim.com/t/real-time-simulation-gives-different-results-for-vienna-rectifier/1947 "2025-03-26T08:10:51Z")

</div>

Hello, My real time simulation using RT Box gives a very different result from the offline simulation? My circuit is Vienna rectifier using voltage oriented controller (cascaded control), I have set the scaling and time…

---

## [Change the start address of the programme from 0x80000 to 0x82000 For TI 28379D](https://forum.plexim.com/t/change-the-start-address-of-the-programme-from-0x80000-to-0x82000-for-ti-28379d/1926)

<div class="topic-metadata">

**Author:** [@rgartemann](https://forum.plexim.com/u/rgartemann)\
**Replies:** 3\
**Last updated:** [March 25, 2025, 2:14pm UTC](https://forum.plexim.com/t/change-the-start-address-of-the-programme-from-0x80000-to-0x82000-for-ti-28379d/1926 "2025-03-25T14:14:32Z")

</div>

Hello, I am working with a TI 28379D and would like to change the start address for the program. How can I configure the program to boot from address 0x82000 instead of 0x80000?

---

## [Issue with Parameter Inlining in plecs version 4.8.6, the feature is not working](https://forum.plexim.com/t/issue-with-parameter-inlining-in-plecs-version-4-8-6-the-feature-is-not-working/1402)

<div class="topic-metadata">

**Author:** [@sayeedmohmds](https://forum.plexim.com/u/sayeedmohmds)\
**Replies:** 1\
**Last updated:** [October 9, 2024, 12:12pm UTC](https://forum.plexim.com/t/issue-with-parameter-inlining-in-plecs-version-4-8-6-the-feature-is-not-working/1402 "2024-10-09T12:12:39Z")

</div>

After I update PLECS to v4.8.6, and TIC2000 library, I tried to generate a simple code on launchpad TI28379D,to generate a duty cycle with an inlining parameter block in the code. This file was working properly in the pr…