# \#variable-phase

**URL:** https://forum.plexim.com/tag/variable-phase/304.md

[Latest](https://forum.plexim.com/latest.md) · [Categories](https://forum.plexim.com/categories.md) · [Tags](https://forum.plexim.com/tags.md)

---

## [Glitch in Variable Phase PWM block?](https://forum.plexim.com/t/glitch-in-variable-phase-pwm-block/1343)

<div class="topic-metadata">

**Author:** [@ThoseWhoWish2B](https://forum.plexim.com/u/ThoseWhoWish2B)\
**Replies:** 5\
**Last updated:** [July 21, 2026, 10:41am UTC](https://forum.plexim.com/t/glitch-in-variable-phase-pwm-block/1343 "2026-07-21T10:41:09Z")

</div>

Hello all, I’m using the Variable Phase PWM block to generate PWM signals for 2 full-bridges that are phase-shifted. Within each full-bridge, their half-bridges have 50% duty and are phase-shifted to create a zero vecto…

---

## [Dual phase shift of dual active bridge DAB](https://forum.plexim.com/t/dual-phase-shift-of-dual-active-bridge-dab/2259)

<div class="topic-metadata">

**Author:** [@kalana](https://forum.plexim.com/u/kalana)\
**Replies:** 6\
**Last updated:** [November 26, 2025, 2:41pm UTC](https://forum.plexim.com/t/dual-phase-shift-of-dual-active-bridge-dab/2259 "2025-11-26T14:41:39Z")

</div>

Hi, I am using a PI controller and the variable phase shift module to do a single phase shift in the DAB and it works very well. I am trying to do a double phase shift between the QP1 and QP2 ( 1st and the 2nd leg of th…

---

## [Dual active Bridge Demo Continuous to Discrete Signal](https://forum.plexim.com/t/dual-active-bridge-demo-continuous-to-discrete-signal/2252)

<div class="topic-metadata">

**Author:** [@kalana](https://forum.plexim.com/u/kalana)\
**Replies:** 4\
**Last updated:** [June 9, 2025, 10:35pm UTC](https://forum.plexim.com/t/dual-active-bridge-demo-continuous-to-discrete-signal/2252 "2025-06-09T22:35:52Z")

</div>

Hi, I am trying to develop a DAB using the model given in the demo version. But however when I change the inputs like Vo, Pin, fsw etc. program crashes. I think its because of the transfer function given in the model.…

---

## [PWM Generation - Variable phase shift and frequency?](https://forum.plexim.com/t/pwm-generation-variable-phase-shift-and-frequency/1380)

<div class="topic-metadata">

**Author:** [@KhaniAmbibox](https://forum.plexim.com/u/KhaniAmbibox)\
**Replies:** 4\
**Last updated:** [September 18, 2024, 5:17am UTC](https://forum.plexim.com/t/pwm-generation-variable-phase-shift-and-frequency/1380 "2024-09-18T05:17:57Z")

</div>

Hi! Is there a simple way to generate a PWM with variable phase and frequency? I know that there are variable phase and variable frequency PWM blocks, but unfortunately without any success. I tried combining the two bl…

---

## [How to create triangular waveform with variable phase shift](https://forum.plexim.com/t/how-to-create-triangular-waveform-with-variable-phase-shift/316)

<div class="topic-metadata">

**Author:** [@nikolay](https://forum.plexim.com/u/nikolay)\
**Replies:** 1\
**Last updated:** [March 27, 2018, 10:27am UTC](https://forum.plexim.com/t/how-to-create-triangular-waveform-with-variable-phase-shift/316 "2018-03-27T10:27:27Z")

</div>

How to create variable delay for non-smooth signals? Specifically, I’m interested in a variable delay for a triangular waveform. The delay value should depend on a signal on the simulation sheet. Thank you very much