# \#variable-pwm

**URL:** https://forum.plexim.com/tag/variable-pwm/629.md

[Latest](https://forum.plexim.com/latest.md) · [Categories](https://forum.plexim.com/categories.md) · [Tags](https://forum.plexim.com/tags.md)

---

## [Glitch in Variable Phase PWM block?](https://forum.plexim.com/t/glitch-in-variable-phase-pwm-block/1343)

<div class="topic-metadata">

**Author:** [@ThoseWhoWish2B](https://forum.plexim.com/u/ThoseWhoWish2B)\
**Replies:** 5\
**Last updated:** [July 21, 2026, 10:41am UTC](https://forum.plexim.com/t/glitch-in-variable-phase-pwm-block/1343 "2026-07-21T10:41:09Z")

</div>

Hello all, I’m using the Variable Phase PWM block to generate PWM signals for 2 full-bridges that are phase-shifted. Within each full-bridge, their half-bridges have 50% duty and are phase-shifted to create a zero vecto…

---

## [Dual phase shift of dual active bridge DAB](https://forum.plexim.com/t/dual-phase-shift-of-dual-active-bridge-dab/2259)

<div class="topic-metadata">

**Author:** [@kalana](https://forum.plexim.com/u/kalana)\
**Replies:** 6\
**Last updated:** [November 26, 2025, 2:41pm UTC](https://forum.plexim.com/t/dual-phase-shift-of-dual-active-bridge-dab/2259 "2025-11-26T14:41:39Z")

</div>

Hi, I am using a PI controller and the variable phase shift module to do a single phase shift in the DAB and it works very well. I am trying to do a double phase shift between the QP1 and QP2 ( 1st and the 2nd leg of th…

---

## [How can I convert the analog circuitry of the frequency converter to C200 compatible mode (by burning it into the 28069M)?](https://forum.plexim.com/t/how-can-i-convert-the-analog-circuitry-of-the-frequency-converter-to-c200-compatible-mode-by-burning-it-into-the-28069m/2689)

<div class="topic-metadata">

**Author:** [@PCL](https://forum.plexim.com/u/PCL)\
**Replies:** 5\
**Last updated:** [November 25, 2025, 2:13pm UTC](https://forum.plexim.com/t/how-can-i-convert-the-analog-circuitry-of-the-frequency-converter-to-c200-compatible-mode-by-burning-it-into-the-28069m/2689 "2025-11-25T14:13:11Z")

</div>

Dear all, I’m using a TI C200 to create a frequency converter closed loop. The waveforms simulated in PLECS are correct, but after programming to a 28069MHz processor, the waveform measured with an oscilloscope is fixed…

---

## [How to Use TI C2000 PWM (Variable)?](https://forum.plexim.com/t/how-to-use-ti-c2000-pwm-variable/1809)

<div class="topic-metadata">

**Author:** [@MarkLin](https://forum.plexim.com/u/MarkLin)\
**Replies:** 6\
**Last updated:** [June 5, 2025, 8:41pm UTC](https://forum.plexim.com/t/how-to-use-ti-c2000-pwm-variable/1809 "2025-06-05T20:41:42Z")

</div>

Dear all, Can anyone tell me how to use TI C2000 PWM (Variable) block? I am testing a single-phase DC/AC circuit using the latest version of this PWM block as shown in the figure below. I already put the PWM block …

---

## [Hi, how do I adjust the FPGA prescaler for the variable PWM block?](https://forum.plexim.com/t/hi-how-do-i-adjust-the-fpga-prescaler-for-the-variable-pwm-block/1277)

<div class="topic-metadata">

**Author:** [@Battur\_Batkhishig](https://forum.plexim.com/u/Battur_Batkhishig)\
**Replies:** 2\
**Last updated:** [October 11, 2023, 6:14pm UTC](https://forum.plexim.com/t/hi-how-do-i-adjust-the-fpga-prescaler-for-the-variable-pwm-block/1277 "2023-10-11T18:14:19Z")

</div>