Please take a minute to review and accept our Terms of Use.
Welcome to the PLECS User Forum, where you can ask questions and receive answers from other members of the community.

Many technical questions regarding PLECS are answered on the Technical Solutions page of our website. Tutorial videos, specific application examples, and pre-recorded webinars are available on our YouTube page. Please follow us on LinkedIn for the latest Plexim news.

I don't understand why the not logical operator is no more working

0 votes
40 views
Hello,

I would like to obtain two signals in S1 and S2 in opposition but unfortunately, the NOT door is no more working as soon I substrate the PWM to the sinus...

 

Could you help me?

 

Thank you
asked Jul 11 by tanguy (28 points)

1 Answer

0 votes

The root of the problem is your modulator implementation.  You should review relevant PLECS models such as the "Voltage Source Inverter" demo to understand how to build a modulator for this type of circuit.

A few comments:

  1. You have the difference between a Sine Wave generator and Pulse Generator as the gate inputs to your MOSFETs.  From the MOSFET component help, "[The MOSFET] conducts a current from drain to source (or vice-versa) only if the gate signal is not zero.".  In this case your gate input is always a non-zero value.  Did you intend to compare the output of difference block with some threshold?
  2. You are applying a NOT logic the signal that is never exactly zero. The behavior of the NOT block is to output "0" for any non-zero input.  Therefore the output of the NOT block is always zero.
  3. There are several wires that overlap, making it difficult to see where signals are coming from / going to.  Cleaning this up would make your model to debug.  For example, some of your upper switches connect to the output of the difference block, while others connect to the pulse generator. Presumably this is an error.
answered Jul 11 by Bryan Lieblick (1,187 points)
...