Please take a minute to review and accept our Terms of Use.
Welcome to the PLECS User Forum, where you can ask questions and receive answers from other members of the community.

Many technical questions regarding PLECS are answered on the Technical Solutions page of our website. Tutorial videos, specific application examples, and pre-recorded webinars are available on our YouTube page. Please follow us on LinkedIn for the latest Plexim news.

Current through Ideal inductor excited by 50Hz Ac source is unidirectional, why?

0 votes
While simulating Parallel RL Circuit with ideal Inductor excited by the 50 Hz AC source, why the current through the inductor is unidirectional, because of which the reactive power frequency is only 50Hz rather than the normal 100Hz
asked Dec 20, 2022 by Muthukumarasamy V (12 points)

1 Answer

+1 vote
The current through the (ideal) inductor is the voltage across the inductor integrated over time. If your voltage is an AC source without phase shift the voltage is 0 at t=0. If the initial current through the inductor is set to 0 then the result of the integration is always >= 0. The resistor has no influence on the inductor current.

If this doesn't match your expectations you can modify the initial current through the inductor or the phase shift of the voltage source (e.g. set the phase shift to 90ยบ where you'd expect the current to reach 0).
answered Dec 20, 2022 by Oliver Schwartz (622 points)
Thank you sir, you were spot on.