Hello,
You can program any 28379D MCU directly from PLECS. For programming either the LaunchPad or the ControlCARD, select the appropriate “Board” type. For a custom board, choose “Custom”, then link the downloaded .ccxml file from Uniflash, as mentioned in the 28379D controlCARD. Note that you can only program one of the cores of this controlCARD directly from PLECS. If you want to program both cores, you can generate code to CCS from PLECS, and then program from there.For any other specific questions, please feel free to email support@plexim.com.Regards,Manu
28379D_CC.plecs (11.8 KB)